CLOSEOUT Hotmark Revolution Low Temp Heat Transfer Vinyl - LIMITED AVAILABILITY
Hotmark Revolution Low temp heat transfer vinyl is a versatile product! It will adhere to a wide range of garments such as cotton, polyester, acrylic AND nylon! Hotmark Revolution Low Temp is a thin and stretch material which makes it feel soft on the garments and great for all projects! Hotmark Revolution Low temp HTV will work well with the crafter cutters such as Cricut Explore, Cricut Maker, Silhouette Cameo 3 and Cameo 4 and the wider format cutters such as the Cameo Plus, and the Graphtec CE-7000.
- 15" width
- Matte Finish (except for Silver, Gold, and Rose Gold)
- Works on Cotton, Polyester, Nylon, and Acrylic Low-Temperature
- Application will not burn the polyester A soft hand on all sorts of materials
- If pressed correctly, it relieves press marks on Polyester garments
- Winner of the 2018 Product of the year award from SGIA
- This material has a flexible wear
- 80 microns thick for a lightweight feel
- Light tack liner for easy weeding
- Can layer
- Product of Chemica
- Due to the manufacturing process, material may vary in width by 1/4-1/2"
- Accessories
- Hotmark Revolution Low Temp HTV 12" Sheets
- Chemica HTV
- Heat Transfer Equipment
- See below for temperature on different garments
- See time specific instructions below
- See below for the peel temperature on different garments
- Medium, even pressure
- Cut in reverse
- Cotton, polyester, nylon, acrylic
- Wash inside out, tumble dry on low heat
Additional Instructions
Application instructions
for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cotton
- 245°
- 20 seconds
Or
- 285°
- 5 seconds
- Peel Hot or Cold
Cotton/Poly Blends
- 250°
- 20 seconds
Or
- 285°
- 5 seconds
- Peel Hot or Cold
Nylon
- First Press
- 285°
- 5 seconds
- Second Press
- 285°
- 15 seconds
- Peel Hot or Cold
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 2
3. Speed at 8
4. Pressure at 6
