CLOSEOUT Forever Flex-Soft (No Cut)
All sales are final on this closeout product, no returns or exchanges
Forever Flex-Soft is a 2-Paper-System that produces a self-weeding transfer in white, metallic, and neon colors. This is also done without a special toner and without cutting and weeding. With the cutting and weeding parts eliminated, this means a quicker process for you! You have an A-Foil sheet that is color with a single color of White, Metallic or Neon. This is very cost effective way that speeds up production, without the expensive toners or printers. Forever Flex-Soft paper can be applied to both white and dark garments of any color.
Compatible with OKI printer models of C831TS, C711WT, and 920WT*. Forever Flex-Soft paper can also be pressed onto wood, paper, ceramic, and other hard surface items!
- 8.5x11" sheets (10 pack)
- Can be printed with some laser printers that use black toner.
FOREVER Flex-Soft is a revolutionary new way of printing single-color or metallic self-weeding designs without any need for a vinyl cutter or plotter! This two-paper system uses a colored foil transparency-like sheet (printable) that is combined with a B-paper for adhesion, for transferring one-color designs easily and quickly. Self-weeding Flex Soft allows for far greater detail possibilities than is possible with cuttable heat transfer vinyl materials.
The FOREVER Flex-Soft heat transfer paper can be pressed onto not only just t-shirts but a wide range of fabric goods made of cotton, polyester, spandex, nylon, etc. Holds up to 10-40 washes
Specifications:
- Can be applied to white/dark t-shirts of any color. Can be applied to cotton, polyester, nylon, and more! Test other fabrics before production. Can also be pressed to wood, paper, ceramic, polypropylene, and other "hard surface" items.
- Compatible with OKI printer models: C831TS, C711WT, and 920WT *
- Please note: The following colors are not compatible with white toner printers - Metallic Silver, Metallic Gold, Black. Self-weeding heat transfer paper.
- Click here for Silicone Sheets
- Wash in warm or cold water (105 degree max. Hang/line dry)
-
Printer Requirements: This paper works only with laser toner printers, including CMYK models, and must be polymer-based.
Printing: You can print on the matte side of the colored sheet (Sheet A) or the white side of the Adhesive Sheet (Sheet B). Sheet A has a glossy and a dull side; Sheet B is white with "Forever" printed on one side. When printing on Sheet A, use mirror image, high-resolution photo mode, maximum toner density, and print on the matte side.
Pressing Sheets: Place Sheet A glossy side down first, artwork facing up, then Sheet B on top with the printed side facing up. Press at 266–293°F for 90–120 seconds with medium/high pressure, covering the image with parchment paper. Peel while hot, keeping the sheet on the platen, and trim any glue residue. For Sheet B, place it image side down on Sheet A and press the same way.
Pressing onto Garments: Place your garment on the heat press and the image on top. Cover with parchment paper and press according to material: cotton 275–310°F (30 sec, medium), polyester 275°F (30 sec, medium), polypropylene 212°F (20 sec, light), blends 266°F (30 sec, medium). Peel completely cold in a rolling motion for best results. For garments, an additional 20–30 second press ensures full adhesion.
