Custom Sign Vinyl Decals are a great way to get your design or logo done on sign vinyl material! If you want skip the work of layering your design for your surfaces and have it printed in one easy application, leave it to us! We take your artwork and print it on our sign vinyl using our HP Latex printers. We then use our Graphtec cutter to contour cut around your artwork. This then allows us to mask your material, making it application ready! Once you receive your designs, all you need to do is apply your transfer to your desired hard surface with a squeegee! To get started, read below on how to send in your artwork and press instructions.
At Heat Transfer Warehouse, we assume our customers have the rights for all trademarked and/or copyrighted logos and designs they submit. We will assume no responsibility in any trademark or copyright infringement disputes. By purchasing from us, the customer agrees to assume any/all liability resulting from actions or demands brought against us for trademark or copyright infringements.
| Size | 25-49, | 50-99, | 100-249, | 250-499, | 500+ |
| 2" x 2" | $1.20 | $1.15 | $1.10 | $1.05 | $0.95 |
| 3" x 3" | $1.80 | $1.70 | $1.60 | $1.50 | $1.40 |
| 4" x 6" | $2.70 | $2.60 | $2.50 | $2.40 | $2.30 |
| 6" x 6" | $3.33 | $3.24 | $3.15 | $3.06 | $2.97 |
| 10" x 10" | $7.00 | $6.91 | $6.83 | $6.74 | $6.56 |
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 1
Speed: 3
Force: 4
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Vinyl
Pressure: Default
Blade:
