My Account
Contact Us
Heat Transfer Warehouse Argyle Blue Green HTV

Argyle Blue Green HTV


Price: $11.00 - $58.70

Sku: CD108312

DISCLAIMER! May delay your order 1-3 business days. This product requires a heat transfer mask to properly work. Adhesive Vinyl Patterns



  • This product requires mask. KTM Mask or 850 Mask
  • If you choose the KTM Mask Option you will receive a 1 yd roll of KTM if you order a 1 yard roll of pattern or will receive a 5 yd roll of KTM if you order a 5 yard roll of pattern.
  • 11" printed workable space
  • Matte finish
  • We recommend if you use this product in a layered design to us this product as the top layer only.
  • If ordering this product it may delay your standard shipping times depending on order value and time order was placed
  • Please see our shipping policies
  • May delay your order 1-3 business days; depending on the time the order is placed and the quantity.
  • This is a Fargo only item, your entire order will ship from Fargo. Transit times may vary.
  • This is a non-returnable product
  • Colors are subject to change without notice
  • Accessories
  • Fashion Sign Vinyl Prints

Patterned Vinyl from Start to Finish

Patterned Vinyl from Start to Finish

How to Cut and Apply Patterned HTV

How to Cut and Apply Patterned HTV
  • Cotton, Polyester, and 50/50: 266°F | Nylon: 302°F
  • Cotton, Polyester, and 50/50: 5 seconds Nylon: Preheat for 5 seconds and press for 5 seconds. remove liner and cover with a teflon sheet and press for another 10 seconds
  • Peel warm
  • Medium, even pressure
  • Cut right reading
  • Cotton, Polyester, Uncoated Nylon, 50/50 blends
  • Wash inside out. Tumble dry.

Additional Instructions

Cut your design right reading
Weed away excess material
Mask your design with a recommended mask
Remove the liner of the mask
Press your design at one of the temps and times listed above
Peel warm

CUT SETTINGS

Cut Settings for Graphtec CE6000:
 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat 

  • FARGO PRODUCT; will make your entire order ship from our Fargo location.