CLOSEOUT Thermoflex Plus 20" Heat Transfer Vinyl
This page is for the CLOSEOUT Colors only
ThermoFlex® Plus 20" heat transfer vinyl is a high-standard vinyl in the garment decoration industry. It offers a soft, matte finish and is available in a range of colors! Looking to use it in your wider cutters? ThermoFlex Plus HTV is offered in wider materials. The heat transfer vinyl is a polyurethane based material and durable. This ready-to-cut heat transfer vinyl can be cut with a laser cutting system, making it versatile. ThermoFlex Plus can be used in your Cricut Explore, Cricut Maker, Silhouette Cameo 3 and Cameo 4 to the wider format cutters such as the Cameo Plus, and the Graphtec CE-7000.
5 Yard Roll = $46.99 CLOSEOUT PRICE $37.60
10 Yard Roll = $88.99 CLOSEOUT PRICE $71.20
- 315° F-330° F
- 15 seconds
- Warm or Cold
- Medium even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Elastan, or blends of these textiles.
- Wait 24 hours before first wash. Warm to cold water and tumble dry. Do NOT use bleach. Do NOT dry clean.
Application instructions
For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Frosty Clear - Dye Sub Instructions
- 320–380°F
- 15 seconds
- Peel cold, then cover with Teflon sheet and repress for 5 seconds
- Medium, even pressure
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
- Offset: 0
- Speed: 25 cm/s
- Acceleration: 4
- Cut Force: 16
HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
- Material: Heat Transfer, Smooth
- Blade: 3
- Speed: 8
- Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
- Set Material: Iron-On
- Pressure: Default
- Blade: Fine-Point Blade (Standard)
