null
Contact Us

Siser EasyWeed Fluorescent 12" Sheets

Write a Review
Price: $3.50

Now available in 12" width material! Siser EasyWeed Fluorescent Heat Transfer Vinyl is a polyurethane film that is a ready-to-cut vinyl for custom garment decoration. Siser EasyWeed Fluorescent Heat Transfer Vinyl comes in a variety of bright, eye-catching colors. Heat Transfer Vinyl is adhered to any garment of your choice by a heat press. Here are some of the outstanding features of Siser EasyWeed which include: 

  • 12" width material
  • Press at a low temp
  • Can layer
  • Semi-gloss finish 
  • 90 microns thick
  • Material may vary in width by 1/8-1/4”.
  • Accessories
  • Siser Easyweed

For your garment needs, we recommend Heat Transfer Clothing

 

12x12" Pricing

1-4 Sheet = $3.50

  • 305°F
  • Preheat garment, apply for 10-15 seconds
  • Peel hot
  • Light, even pressure
  • Cut in reverse
  • 100% polyester, 100% cotton, poly/cotton blends
  • Machine wash warm with mild detergent. DO NOT dry clean. NO bleach. Dry at normal setting

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

Customers Also Bought