Siser Brick 600 Heat Transfer Vinyl | 3D Dimensional HTV
Siser Brick 600 is a 3D heat transfer vinyl (HTV) that’s 600 microns thick yet still flexible. This raised, dimensional vinyl is perfect for smaller logos or designs when you want bold dimension and a professional matte finish. Use Siser Brick 600 to add extra depth to t-shirts, caps, bags, photo panels, and left chest logos. If your designs are looking a little flat, this thick heat transfer vinyl is the perfect way to make them pop.
Brick 600 is also CPSIA Certified, making it safe for decorating children’s clothing and accessories. Plus, it’s laser safe and popular for corporate logo applications.
Looking for alternatives or companion products? Check out Siser EasyWeed HTV for everyday projects, our full Dimensional Vinyl collection for other raised finishes, and the Siser Color Equivalent Chart to match shades across materials.
You can shop Siser Brick 600 12" Sheets directly, or browse Siser EasyWeed and other must-have Accessories and Equipment to complete your setup.
FAQ
What is Siser Brick 600 HTV used for?
Siser Brick 600 is designed for smaller logos and designs where you want a 3D, raised look. It’s commonly used on caps, bags, uniforms, and left chest logos.
Can Siser Brick 600 be layered with other vinyls?
Yes. It can be layered, but only if Brick 600 is the bottom layer to ensure proper adhesion.
Is Siser Brick 600 HTV safe for children’s clothing?
Yes. Brick 600 is CPSIA Certified, which means it’s safe to use on children’s apparel and accessories.
20" Pricing:
3 foot roll = $14.49
5 yd roll = $62.99
10 yd roll = $115.99
Fluorescent 20" Pricing:
5 yd roll = $79.99
10 yd roll = $149.99
- 311° F
- Cover with heat transfer cover sheet preheat garment for 2-3 seconds. Then press design for 20 seconds.
- Peel Cold
- Medium pressure
- Cut in reverse
- Adheres to 100% cotton, poly/cotton blends, 100% uncoated polyester, Lycra/spandex
- Wait 24 hr before first wash. Machine wash cold w/mild detergent. Do not dry clean.. Do not Bleach. Dry at low setting
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
- 1. Cut In Reverse
- 2. Weed
- 3. Preheat Garment 20 seconds
- 4. Tack design for 10 seconds - face side
- 5. Turn inside out heat for 20 seconds on adhesive side
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.
- - Offset: 0
- - Speed: 25 cm/s
- - Acceleration: 4
- - Cut Force: 30
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
- - Material: Heat Transfer, Flocked
- - Blade: Standard, 10
- - Speed: 4
- - Force: 33
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
- - Set Material: Light Cardstock
- - Pressure: More
- - Blade: Fine-Point Blade (Standard)
Siser Brick 600 PDF Instructions
