Oracal 651 Vinyl 12"

Oracal 651 Adhesive Vinyl

Oracal 651 Adhesive Vinyl is great for your next project! ORACAL 651 is made with a clear, solvent-based, permanent adhesive that has the durability rating for up to 6 years! It is easy to weed with it's 84# custom silicone coated paper that has special release characteristics. ORACAL 651 is offered in a glossy finish for all color. Matte finish is also offered in black and white only.

12" width
High Gloss Oracal 651 Sign Vinyl for all hard surface applications
Intermediate Calendered sign vinyl
Outdoor vinyl that stands at the top of industry quality standard.
Resistant to cracking, shrinking and peeling.
2.5 mil thick Solvent permanent adhesive
6-year outdoor durability
Due to the manufacturing process, material may vary in width by 1/8-1/4"
Looking for something more affordable: Click here
For Mask or Tape, click here
Oracal Vinyl
Full roll orders (50 yard rolls) will make your ENTIRE order ship ground (up to 2-5 days service)

Frequently Asked Questions

What is Oracal 651 Vinyl used for ?
It can be used to make crafts and signage of all types including decals for automobiles, decorations, and much more.

Is Oracal 651 Vinyl permanet ?
Yes!

How thick is Oracal vinyl ?
2.5 mil thick

How to apply oracal 651 vinyl ?

Cut color side up (do not mirror)
Weed excess material
Apply transfer tape with squeegee with a smooth even pressure across the entire image.
Flip over decal and remove the paper backing from the transfer tape and vinyl decal by pulling across the image.
Make sure the surface you are applying the decal to is clean and dust free.
Place decal on surface.
Use squeegee with smooth even pressure across the decal to be sure all of the vinyl has adhered to the surface.
Pull the transfer tape back across the image.(do not pull up) until the transfer tape is removed. Leaving just the vinyl on the surface.

How to cut oracal 651 vinyl ?
Follow the application instructions below.

How to cut oracal 651 vinyl cricut ?
Follow the application instructions below.

How to cut oracal 651 vinyl sillhoutte ?
Follow the application instructions below.

12" Pricing:

Sheet = $1.25

3 ft roll = $3.00

5 yd roll = $14.00

10 yd roll = $27.00

50 yd roll = $127.50

*50 yd rolls ship Ground Only: if part of a larger order, your ENTIRE order will ship ground.

Cut right reading Adheres to hard surfaces

Additional Instructions

Cut image in right reading Weed material Squeegee transfer mask over image

Remove the white backing (images will stick to the transfer mask)

Squeegee images onto surface Remove transfer mask

*651 is asel-adhesive material. It creates an excellent bond with just about aby clean, smooth, and waterproof surface which is free of grease, wax, or silicone.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 1

Speed: 3