Contact Us

Metal Flake 15"

Write a Review
Sku: 64415-5
Price: $52.00
  • Dazzling effect
  • Smooth finish glitter
  • Not textured
  • Will not adhere to nylon
  • Approximately 110 Microns thick
  • Will not layer
  • Due to the manufacturing process, material may vary in width by 1/8-1/4
  • Accessories
  • ThermoFlex Plus

For your garment needs, we recommend Heat Transfer Clothing

 

15" Pricing:   
1 yd roll = $10.25
5 yd roll = $48.00
10 yd roll = $92.00
20 yd roll = $180.00
30 yd roll = $264.00
12" x 15" sheet = $4.00

  • 330° F
  • 17-20 seconds
  • Peel Warm or Cold
  • Firm/Hard even pressure
  • Cut in reverse
  • Cotton, linen, wool, lycra, polyester blends & spandex
  • Wash warm, tumble dry, normal settings

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 8

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: More

Blade: Fine-Point Blade (Standard)

Metal Flake

Metal Flake