Express Neons are a thin, elastic, soft to the hand vinyl that blends well into the textiles, now offered in bright fluorescent colors! Low-temperature application prevents undesirable effects such as glossiness and fiber damage!
Vibrant Neon Colors for Impactful Designs
WALAKut Express Neon HTV is perfect for adding vibrant, fluorescent hues to custom apparel. Its thin, elastic nature blends seamlessly into fabrics for a soft, comfortable feel. The neon colors create bold, attention-grabbing designs that stand out.
Matte Finish and Layerable Application
This vinyl has a smooth matte finish and is highly layerable, giving you the flexibility to create multi-layered, colorful designs. It’s easy to cut and applies well at a low temperature, minimizing glossiness and protecting the fabric from damage. The sticky liner ensures easy handling and precision during the application.
- 12 inch width
- 90 micron thick
- Matte finish
- Neon color
- Layerable
- Has a sticky liner
- Due to the manufacturing process, material may vary in width by 1/8-1/4"
- Can be applied at a low temperature if needed
- REACH compliant
- Certified Öko-Tex® Standard 100 Class I
- Accessories
- WALAKut HTV
- WALAPresses
- Heat Transfer Equipment
- 250° F-302° F for multi-layering or thick cotton
- 5 seconds
- Warm or Cold
- High, even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Elastan, or blends of these textiles.
- Wait 24 hours before first wash. Warm to cold water and tumble dry. Do NOT use bleach. Do NOT dry clean.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
