Preheat garment for 2-3 seconds then press vinyl for 5 seconds.
Peel Backing Hot or Cold. Apply top layer
Cut in reverse
100% Cotton, 50/50 blends, 100% Polyester
Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Do NOT bleach or dry clean. Hang item to dry
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Cut Settings for Cricut®: