DecoFilm Soft Metallics. Add perceived value to your fashion designs with the brilliant accent of precious metals. Offers a smooth and soft metallic finish. It is stretchy, very durable, and comes in many different finishes and patterns. It offers a soft hand and when applied, will take on the texture of the garment.

• 20" width
• 30 and 54-yard lengths are dropships
• Offers a smooth and soft metallic finish
• Can be layered as top level or inlay 
• 3 mils/75 microns
• Silver Holoshine DFMP-124 has a manufacturing line every 14"-20"
• Stretchable film
• Very durable
• Add value to any design
• Easy cutting film for all styles of plotters
• Any colors marked with an * means it will be drop shipped from the vendor
• Test before doing high runs of Dazzle cloth or shiny polyester fabrics
• Accessories
• Heat Transfer Equipment
• DecoFilm Soft Metallics 12" HTV

• 302°F - 320°F
• 7-8 seconds
• Peel Cold - Repress with Teflon for 3-5 seconds
• Medium pressure
• Cut in Mirror Image
• Cotton, Uncoated Polyester, Fabric Blends, Poly/Acrylic ** NO NYLON
• Wash Inside Out, Gentle Cycle, Cold Water, Tumble Dry Low. Suitable for Dry-Cleaning.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000: 

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 18

*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 7

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

• Deco-Film Soft Metallics Patterns PDF Instructions