10" Thermoflex Plus CLOSEOUT Heat Transfer Vinyl
Professional Quality with a Smooth Matte Look
ThermoFlex Plus is a premium, polyurethane-based heat transfer vinyl trusted by decorators everywhere. It delivers professional quality with a soft matte finish, excellent durability, easy weeding, and flexibility that moves with the garment. This industry standard has been relied on for decades, giving you long-lasting results that look and feel great.
Why Choose ThermoFlex Plus?
- Matte finish with soft hand – smooth, professional look
- PU composition – durable and flexible
- Strong adhesive & easy weeding – pressure-sensitive carrier helps with small details
- Designed to outlast the life of the garment when applied properly
Fabric Compatibility
- Cotton, polyester, cotton/poly blends, spandex, Lycra®
- Not recommended: mesh or treated surfaces unless prepped as instructed
Note: Due to the manufacturing process, material width may vary by 1/4" to 1/2".
10 Yard Roll = $54.99 CLOSEOUT PRICE $39.48
- 315° F-330° F
- 15 seconds
- Warm or Cold
- Medium even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Elastan, or blends of these textiles.
- Wait 24 hours before first wash. Warm to cold water and tumble dry. Do NOT use bleach. Do NOT dry clean.
Application instructions
For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
- Offset: 0
- Speed: 25 cm/s
- Acceleration: 4
-
Cut Force: 16
HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
