DecoFilm Soft Metallics. Add perceived value to your fashion designs with the brilliant accent of precious metals. Offers a smooth and soft metallic finish. It is stretchy, very durable, and comes in many different finishes and patterns. It offers a soft hand and when applied, will take on the texture of the garment.
- 302°F - 320°F
- 7-8 seconds
- Peel Cold - Repress with Teflon for 3-5 seconds
- Medium pressure
- Cut in Mirror Image
- Cotton, Uncoated Polyester, Fabric Blends, Poly/Acrylic ** NO NYLON
- Wash Inside Out, Gentle Cycle, Cold Water, Tumble Dry Low. Suitable for Dry-Cleaning.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 18
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 7
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
