Causes

Stand together with these ribbon heat transfer rhinestones along with other various designs to show your support!

• Low Lead Korean Rhinestones
• Select design to see specific pricing
• Hot fix designs
• Heat press for best results
• This is a Fargo only item, your entire order will ship from Fargo. Transit times may vary.

• See below for temperature on different garments
• See below for time on different garments
• Peel warm
• Medium to firm, even pressure
• Print and Cut your design right reading
• Cotton, Polyester, Uncoated Nylon, 50/50 blends
• Wash inside out. Tumble dry.

Additional Instructions

For Cotton, Polyester, 50/50 blends
Temp      Time
266°F :  5 seconds 
302°F:   4 seconds
320°F:   3 seconds

For NYLON
Press at 302°F
Preheat garment for 5 seconds. Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds. 

Additional Instructions 
Print and cut your design right reading
Remove from printer and wait for inks to completely dry
Weed away excess material
Press your design at one of the temps and times listed above
Peel warm

 

CUT SETTINGS

Cut Settings for Graphtec CE6000:
 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat 

Write a Review

Hot Fix Rhinestone Tutorial