• See below for temperature on different garments
• See time specific instructions below
• See below for the peel temperature on different garments
• Medium, even pressure
• Cut in reverse
• Cotton, polyester, nylon, acrylic
• Wash inside out, tumble dry on low heat

Additional Instructions

Application instructions

for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.  

Cotton

- 245°

- 20 seconds

Or

- 285°

- 5 seconds

- Peel Hot or Cold

Cotton/Poly Blends

- 250°

- 20 seconds

Or

- 285°

- 5 seconds

- Peel Hot or Cold

Nylon

- First Press

- 285°

- 5 seconds

- Second Press

- 285°

- 15 seconds

- Peel Hot or Cold   

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

1. Smooth Heat Transfer Material Setting

2. Blade at a 2

3. Speed at 8

4. Pressure at 6