Contact Us

WALAKut Patterned Vinyl

Write a Review





WALAKut Patterned HTV

  • 12" width
  • Laminated pattern
  • Ready to cut and press-no masking needed!
  • Sticky Liner
  • Due to the manufacturing process, material may vary in width by 1/8-1/4"
  • WALAKut
  • Patterned Vinyl

 

Pricing:   
12x12 Sheet = $4.00
1 Yard Roll = $9.50
5 Yard Roll = $46.00
10 Yard Roll = $88.00
25 Yard Roll = $215.00  

  • 300°F
  • 10 seconds
  • Peel hot to warm
  • Medium, even pressure, cover and reheat if necessary
  • Cut in reverse
  • Adheres to most fabrics
  • Wash inside out using cold water. Tumble dry low heat. No bleach. No fabric softener. 

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 23

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 4

Speed: 8

Force: 11

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: More Blade: Fine-Point Blade

Customers Also Bought