SISER1269 - Pumpkin Coffeebuck

• 250° - 300°F
• 10 seconds at 250°F and 5 seconds at 300°F
• Peel warm
• Medium to High
• Cut right reading
• Adheres to most fabrics
• Wash inside out using cold water. Tumble dry low heat. NO bleach. No fabric softener.

Additional Instructions

For Cotton, Polyester, 50/50 blends
Temp      Time
266°F :  5 seconds 
302°F:   4 seconds
320°F:   3 seconds

For NYLON
Press at 302°F
Preheat garment for 5 seconds. Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds. 

Additional Instructions 
Cut your design right reading
Weed away excess material
Press your design at one of the temps and times listed above
Peel warm

CUT SETTINGS

Cut Settings for Graphtec CE6000:
 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat 

• Digital Patterns PDF Instructions