Siser EasyWeed Stretch 15"

Need a heat transfer vinyl that works on your performance wear? EasyWeed Stretch delivers that with all the same benefits as EasyWeed but with added stretchability! It's the thinnest vinyl line from the Siser material. EasyWeed Stretch is an ultra-matte finish with a soft hand feel available in a wide range of colors. Using EasyWeed Stretch for your ideal performance apparel, it will become a favorite for other garment decorating due to the soft hand feel and lightweight!

EasyWeed Stretch is CPSIA Certified, so it’s safe on your garments for any age!

• 15" width material
• Matte Finish
• 85 Microns/3.5 Mils Thick
• Ability to stretch
• Can be layered
• Can be used with a Laser Cutter
• Works on lycra, spandex, cottons, poly & blends
• Material may vary in width by 1/8-1/4"
• Pre-shrink any shirt with cotton listed as a material
• Composition: PU
• CPSIA Certified
• Accessories
• Siser EasyWeed

For your garment needs, we recommend Heat Transfer Clothing

• Men's Clothing
• Women's Clothing

• 320° F
• Pre-press for 2-3 seconds, then 20 seconds with transfer
• Peel Hot or Cold
• Firm even pressure
• Cut in reverse
• 100% uncoated polyester, poly/cotton blends, 100% cotton, lycra, spandex, and leather
• Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener. Dry at normal setting.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16-19 (recommend a test cut first)

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

• Siser EasyWeed Pantone Color Chart