Cut in reverse
Cotton, cotton/polyester, polyester/acrylic
Machine wash cold, regular dry
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
**Cover with teflon, repress for 5 seconds, let cool then remove teflon**
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test cutting is recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 2
3. Speed at 8, Thickness at 12
4. Used Cutting Mat
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade