• See below for temperature on different garments
• See below for time on different garments
• Low even pressure
• Medium, even pressure
• Cut and print your design, right reading
• Cotton, Polyester, Uncoated Nylon, Mixtures of polyester/cotton and polyester/acrylic
• Wash inside out, gentle cycle, cold water and tumble dry.

Additional Instructions

Temp     Time

266°F : 5 seconds

302°F : 4 seconds

320°F : 3 seconds

Cotton, Polyester & Cotton/Polyester Blends

• 270°F.
• 45 blade is recommended 
• Press once for 5 seconds    
• Print and cut your design right reading
• Remove from printer and wait for inks to completely dry
• Weed away excess material
• Medium even pressure
• Peel warm 

Uncoated Nylon

• 302°F
• 45 blade is recommended 
• Preheat garment for 5 seconds.
• Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds.   
• Print and cut your design right reading
• Remove from printer and wait for inks to completely dry
• Weed away excess material
• Low even pressure
• Peel warm 

Application instructions

For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.