Superior quality, high reliability, entry-level cutting plotter! This Graphtec CE LIGHT-50 20" cutter is going to do the job and more! It's great for those small-to-medium production runs for all of your heat transfer vinyl, decals and signage material!
|AC adapter||1||Cord type varies by country|
|Cutter Set (Standard Blade)||1||Standard type (PM-BS-001)|
|Carrier Sheet (13-inch)||1||330 mm wide (13 inches : PM-CM-003)|
|Cross cutter||1||For manually cutting from sheets and rolls (PM-CC-001)|
|Roll media stocker||1|
|Blade tip cap tool||1||For removing the edge of a blade|
|USB cable||1||1.5 m long|
|Setup manual||1||Written in 10 languages|
|Safety manual||1||Written in 10 languages|
|Maximum cutting area (W x L) (*1)||19.6 x 118.11 in (498 mm x 3 m)|
|Cutting area of guaranteed accuracy (W x L)(*1)||18.81 x 39.37 in (478 mm x 1 m)|
|Mountable media width (*2)||Max. 18.81 in (508 mm) Min. 8.26 in (210 mm) (A4 portrait orientation)|
|Mountable roll media type||diameter||2-inch paper tube: Maximum diameter 5.9 in (150 mm), Minimum diameter: 2.07 in (52.8 mm)
3-inch paper tube: Maximum diameter 5.9 in (150 mm), Minimum diameter: 3.07 in (78.2 mm)
|weight||Max. 5.5 lb (2.5 kg)|
|Maximum cutting speed||19.68 in/s (500 mm/s) in all direction|
|Maximum cutting force||2.1 N (210 gf)|
|Pen type||Fiber-tip or ballpoint pen available in market(*3)|
|Media type||up to 4 mil (0.1 mm) thick self-adhesive film (vinyl / fluorescent / reflective)
*high-intensity reflective film is excluded
|Programmable resolution||GP-GL : 0.1 / 0.05 / 0.025 / 0.01 mm
HP-GL™ : 0.025mm
|Storage device (external input)||USB memory|
|Power source||100-240 V AC, adapter output 24 V DC (2A)|
|Power consumption||32 W|
|Operating environment||10 to 35 ºC, 35 to 75 % R.H. (non-condensing)|
|Guaranteed accuracy environment||16 to 32 ºC, 35 to 70 % R.H. (non-condensing)|
|External dimensions (W x D x H)||Approx. 30.86 x 8.94 x 6.45 in (784 x 227 x 164 mm) (without roll media stocker)|
|Weight||Approx. 17.64 in (8.0 kg) (without roll media stocker)|
|Compatible OS (*4)||Windows 10 / 8.1 / 8 / 7
Mac OS X 10.6 to 10.11 / macOS 10.12 (Sierra) to 10.13 (High Sierra)
(Graphtec Studio: 10.6 - 10.13, Cutting Master 4: 10.7 - 10.13)
|Supported software / driver||Cutting Master 4, Graphtec Pro Studio, Graphtec Studio (for Mac), Windows driver|
|Compatibility Standards||Safety||UL/cUL, CE mark|
|EMC||VCCI Class A, FCC Class A, CE mark (EN55032, others)|
(*1) When operated with Graphtec specified media and conditions. (the roll media stocker is used for long media)
(*2) For non-standardized sizes, use the carrier sheet.
(*3) It requires the pen adapter for CE LITE-50 ( Optional ). The diameter range of available water-based felt-tipped pen ：8 mm to 11.3 mm.
There are 3 types of pen adapter to match the width of water-based felt-tipped pen. *There are cases where the pen is not available depends on the shape.
(*4) Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.