Contact Us

Discount WALAKut Soft 12" Grey 5 Yard Rolls

Write a Review
Sku: DISCOUNT-170





Discount WALAKut Soft 12" Grey 5 Yard Rolls

  • Matte finish
  • 50 microns thick
  • Polyurethane film for garment decorating
  • Very thin material for a soft finished feel and wear
  • Material penetrates into the garment fibers
  • Very elastic and easy to apply
  • Designed for stretchable products
  • Non- sticky liner NOT intended for fine detailed designs
  • Can layer
  • The material is 12" wide
  • Not for nylon, treated or dye sublimated fabrics
  • Due to the manufacturing process, material may vary in width by 1/8-1/4"
  • *Fargo item only. your entire order will ship from Fargo, ND location if the item is included in your order  

12" Pricing:
5 yd roll = $26.36
FARGO ONLY product; will make your entire order ship from our Fargo, ND location.

  • 310°F
  • 15 seconds
  • Peel Cold Medium, even pressure
  • Cut in mirror image
  • Cotton, 100% uncoated polyester, cotton/poly blends, and lycra.
  • Turn garment inside out. Wash and dry on cold.

Additional Instructions

Application instructions

for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:  

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)  

  • WALAKut-Soft PDF Instructions

Customers Also Bought