Contact Us

Discount ThermoFlex Plus 15" Violet 5 Yard Rolls

Write a Review
Sku: DISCOUNT-151





Discount ThermoFlex Plus 15" Violet 5 Yard Rolls

 

ThermoFlex® Plus 15" heat transfer vinyl is a high-standard vinyl in the garment decoration industry. It offers a soft, matte finish and is available in a range of colors! Looking to use it in your wider cutters? ThermoFlex Plus HTV is offered in wider materials. The heat transfer vinyl is a polyurethane based material and durable. This ready-to-cut heat transfer vinyl can be cut with a laser cutting system, making it versatile. ThermoFlex Plus can be used in your Cricut Explore, Cricut Maker, Silhouette Cameo 3 and Cameo 4 to the wider format cutters such as the Cameo Plus, and the Graphtec CE-7000.

  • Matte finish
  • 100 microns thick
  • Can be used with a Laser Cutter Quality, brand name heat transfer vinyl Soft hand, very flexible, & moves with the garment
  • Polyurethane composition
  • Durable and will outlast the life of the garment when applied properly
  • Dye Migration may occur with low energy dyes in polyester and polyester blends
  • Due to the manufacturing process, material may vary in width by 1/8-1/2"
  • ThermoFlex Pantone Swatches
  • ThermoFlex 12"
  • ThermoFlex 20"    
 

Pricing:
5 yd roll = $29.60  

  • 330° F
  • 15 seconds
  • Peel warm or cold.
  • Medium/firm even pressure
  • Cut in reverse Cotton, linen, wool, lycra, spandex, polyester blends.
  • NO nylon/ NO mesh
  • Wash warm, tumble dry on normal setting

 

Additional Instructions

Application instructions

For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Frosty Clear - Dye Sub Instructions 

320-380°F

15 seconds

Peel cold then cover with Teflon sheet and repress for 5 seconds Medium, even pressure

 

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

Customers Also Bought