Contact Us

Discount ThermoFlex Neons 15" Neon Yellow 5 Yard Rolls

Write a Review
Sku: DISCOUNT-190





Discount ThermoFlex Neons 15" Neon Yellow 5 Yard Rolls

Need a little pop of color or for your garments to stand out? ThermoFlex Neons will help you achieve that with its bright saturated color while keeping the same soft hand feel after pressing ThermoFlex Plus®!

  • Vibrant neon colors
  • White adhesive backing that is suitable for dark garments
  • Add a flash of color to all your shirt designs Will not layer
  • Will not adhere to nylon
  • Can be used with a Laser Cutter
  • Approximately 100 Microns Thick
  • Due to the manufacturing process, material may vary in width by 1/8-1/4"
  • ThermoFlex 12"
  • ThermoFlex 15"
 

Pricing:
5 yd roll = $31.00

  • 330° F
  • 15 seconds
  • Peel warm or cold.
  • Medium/firm even pressure
  • Cut in reverse Cotton, linen, wool, lycra, spandex, polyester blends.
  • NO nylon/ NO mesh
  • Wash warm, tumble dry on normal setting

 

Additional Instructions

Application instructions

For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Frosty Clear - Dye Sub Instructions 

320-380°F

15 seconds

Peel cold then cover with Teflon sheet and repress for 5 seconds Medium, even pressure

 

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

Customers Also Bought