Contact Us

Discount Hotmark Revolution Low Temp White 20 - 1 Yard Rolls

Write a Review

Discount Hotmark Revolution Low Temp HTV

Hotmark Revolution Low temp heat transfer vinyl is a versatile product! It will adhere to a wide range of garments such as cotton, polyester, acrylic AND nylon! Hotmark Revolution Low Temp is a thin and stretch material which makes it feel soft on the garments and great for all projects! Hotmark Revolution Low temp HTV will work well with the crafter cutters such as Cricut Explore, Cricut Maker, Silhouette Cameo 3 and Cameo 4 and the wider format cutters such as the Cameo Plus, and the Graphtec CE-7000.

  • 20 - 15"x1 Yards Rolls 
  • Matte Finish 
  • Works on Cotton, Polyester, Nylon, and Acrylic Low-Temperature
  • Application will not burn the polyester A soft hand on all sorts of materials
  • If pressed correctly, it relieves press marks on Polyester garments
  • Winner of Product of the year award from SGIA
  • This material has a flexible wear
  • 80 microns thick for a lightweight feel
  • Light tack liner for easy weeding
  • Can layer Product of Chemica
  • Due to the manufacturing process, material may vary in width by 1/8-1/4"  



  • See below for temperature on different garments
  • See time specific instructions below
  • See below for the peel temperature on different garments
  • Medium, even pressure
  • Cut in reverse
  • Cotton, polyester, nylon, acrylic
  • Wash inside out, tumble dry on low heat

Additional Instructions

Application instructions

for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.  


- 245°

- 20 seconds

- Peel Hot or Cold

Cotton/Poly Blends

- 230°

- 25 seconds

- Peel Hot or Cold


- 285°

- 20 seconds

- Peel Hot or Cold   

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

1. Smooth Heat Transfer Material Setting

2. Blade at a 2

3. Speed at 8, Pressure at 6

  • Hotmark Revolution Low Temp PDF Instructions
  • CINCINNATI PRODUCT; will make your entire order ship from our Cincinnati location.

Customers Also Bought