• 300-320°F
• 15-20 seconds
• Cold Peel
• Medium pressure
• Cut in reverse
• Cotton, polyester, acrylic, and similar fabrics
• Wash inside out, cool (140° F), gentle cycle, tumble dry low heat

Additional Instructions

Cut Settings for Silhouette Cameo:

1. Smooth Heat Transfer Material Setting

2. Blade at a 2

3. Speed at 5, Pressure at 8

*Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Cut Settings for Graphtec CE6000:

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*For Carbon, Leather, Basketball and Python we recommend a cut force of 23 on a Graphtec CE6000

*HTW uses a 45 Degree Blade

*Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.