Chemica UpperFlok

• Soft velvet to the touch
• Thick fibers 
• Easy to weed
• Available in bright colors
• PVC based product
• Can layer
• 300 microns thick
• Due to the manufacturing process, material may vary in width by 1/8-1/4"
• Accessories

For your garment needs, we recommend Heat Transfer Clothing

• Men's Clothing
• Women's Clothing

Dropship items (marked with *)

• This item is a Drop Ship Item.
• This material will ship separately from your order.
• Material ships ground from Chemica US Corp- Norcross, GA. These rolls take up to 5 days to process before shipping ground.

• 320° F
• 15-20 seconds
• Peel liner cold
• Medium/Firm, even pressure
• Cut in mirror image. 60 degree blade is recommended.
• Cotton, polyester, acrylics and similar fibers
• Wash inside out with cold water. Dry with medium temperature.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test cutting is recommended.

1. Flocked Heat Transfer Setting

2. Blade at a 3

3. Speed at 5, Pressure at 33

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 23

*HTW uses a 45 Degree Blade

• Chemica UpperFlok PDF Instructions