5 yd roll = $50.00
For Cotton, Polyester, 50/50 blends
266°F : 5 seconds
302°F: 4 seconds
320°F: 3 seconds
Press at 302°F
Preheat garment for 5 seconds. Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds.
Cut your design right reading
Weed away excess material
Press your design at one of the temps and times listed above
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat
Heat Transfer Warehouse