15" Sign Vinyl
High Gloss Calendared Vinyl
These PVC Films are HIGH GLOSS with excellent stability. They are soft in nature and will conform to curved or flat surfaces, which makes them superior for die cutting or when a flexible film is required. These films have a very high tack adhesive specifically formulated for banner graphics and lettering.
They have a long-term SIX (6) YEAR OUTDOOR DURABILITY for outdoor
signage. 3.0 Mil
 APPLICATION WITH WATER ONLY. NOT TO BE USED WITH SOLVENT BASED APPLICATION FLUIDS.
RECOMMENDED ACCESSORIES:
Transfer Mask
Teflon Squeegee
|
|
|
We also recommend HTW Transfer Tape with your Sign Vinyl Purchase...it is required for proper application.
APPLICATION TAPE / TRANSFER MASK
Our Application Tape has many wonderful qualities, which makes it a great choice. Comes in 100 yard rolls and is available in multiple width options: 6.5", 8.5", 12", 14", and 24".
• Easy to handle
• Forgiving when applying graphics
• Smooth Release
• Tears easily with no legging
• No adhesive residue |
|
| |
501 White
|
|
502 Black
|
| |
508 Saphire Blue |
|
513 Ocean Blue
|
| |
519 Green
|
|
524 Dafffodil Yellow |
| |
534 Burgundy
|
|
546 Purple
|
| |
522 Dark
Yellow
|
|
133
Orange
|
| |
537 Cherry
Red
|
|
550 Gold
|
| |
|
|
551 Silver
|
| |
|
|
|
Due to the limitations of internet, monitor variations and computer settings, the swatches shown on these pages are only representative of our products colors or pattern.
|
15" Sign Vinyl
Material Guidelines & Specs.
Below is a list of useful application details and suggestions to follow when using this product to ensure the best possible results.
CONSTRUCTION
Face Film - 3.0 mil high gloss, intermediate calendered vinyl film
Adhesive Release - Aggressive, acrylic, permanent, pressure-sensitive. Not to be used with solvent based application fluids.
Liner - 78# (White) Bleached Kraft
|
PHYSICAL PROPERTIES
Outdoor Durability - 6 years, mid-continental U.S., vertical.
Minimum Surface/Ambient Air
Application Temperature + 35° F.
Application Surface - Interior and exterior markings/decals requiring low cost and flexible products.
e.g. original equipment markings.
Service Temperature Range
50°F. to +150°F. — Reasonable range of temperatures, which would be expected under normal environmental time and temperature conditions.
Opacity - Normal
Typical Film Caliper (w/Adhesive)
3.8 – 4.2 mils
Chemical Resistance
Good for most petroleum solvents and lower aliphatic alcohols. For ultimate solvent resistance, edge sealing is recommended.
Water Resistance - Excellent: Test piece aged 24 hrs. after application to stainless steel panelbefore testing. Not affected when immersed in 70°F water for seven days.
NOTE: Always pretest your specific substrates prior to actual application.
Adhesion - 50 oz/in.
Shelf Life - 2 years when stored under conditions of 70°F and 50% relative humidity. |
The above information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
|
